Followers

Tutorials

I Create For:

I Admin For:

Scrappy Bit of Fun

My First Award!

My First Award!
Thank you, Sarah!
Artwork ©Misticheskaya http://www.picsfordesign.com. Powered by Blogger.

Search

Tuesday, September 30, 2014

Mad Crazy (Scrap Candy)



Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I chose is Mad Crazy by Toxic Desirez
This fantastic kit and more can be found at Scrap Candy

Start by opening Frame 4 and placing it in the center of your canvas.

Using your magic wand select inside the frame and expand by 5 pixels.

Choose a background paper of your choosing from the elements folder. I chose background 3. 
Copy and paste background, invert and hit delete on your keyboard. 
Move below frame. Deselect.

PLEASE TAKE A MOMENT TO SAVE YOUR PROGRESS

Now you want to add your tube. 

I am using Halloween Alice designed by Lady Mishka
This tube was a PFD Prepaid Project tube gifted to me and not available for purchase.
However, there are plenty of Alice in Wonderland inspired tubes out there for purchase!

Place your tube choice where you would like. I placed my tubes to the right of the frame.

Now start adding your elements to create your tag!

I used Elements:

Bottle
Cards
Clock
Shroom
Shrooms
Stacked Cups
Tea Pot

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is Alice in Wonderland

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/30/14 by Christie
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.


Sunday, September 28, 2014

Everblu (Honored Scraps)

Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I chose is Everblu by Honored Scraps
This kit and more can be purchased at Treasured Scraps

Start by opening Heart Ribbon 1 and placing it in the center of your canvas.

Using your magic wand select inside the frame and expand by 5 pixels.

Choose a paper of your choosing. I chose paper 7. 
Copy and paste paper, invert and hit delete on your keyboard. Move below frame.
Don't deselect.

Choose a tube and place in the frame in the center.

The tube I chose is Dressed by Keith Garvey. This tube was purchased from MPT.
However, this tube is available for purchase from Mr Garvey's new site for $2.00

Duplicate the tube and hide it. 
With the original tube selected, copy and paste your tube into the center of the canvas. 
Hit delete on your keyboard and deselect.

Unhide the duplicated tube and move to the top of the frame. With your eraser, remove any excess from the bottom part of the tube. See my tag for reference if needed

PLEASE TAKE THE TIME TO SAVE YOUR PROGRESS

I didn't add to many elements to this tag, but you are welcome to add whatever you would like!

The elements I used:

Blossom 1
Butterfly 1
Flower 12
Love Wrap 3

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is Jellyka Delicious Cake

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/28/14 by Christie
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.


Fairyland Princess (Scrap Candy)



Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I chose is Fairyland by Dance in the Rain
You can find this kit and more at Scrap Candy

Start by opening frame 71 and placing it in the bottom center of your canvas.

Using the first element as a base, start adding other elements to create your own fairyland!

For example, I started with element 20. Copy and resize, then place where you would like.
Next I added element 10. Resized and placed it next to the trunk.

It may also be easier to add your tube so you can build around it as well.

I am using Princess from Celineart Pinup which was purchased at PFD but is no longer available.
Celine has her own website at Celineart Pinup

Place your tube where you would like. I placed mine to the left above the first element.

PLEASE TAKE A MOMENT TO SAVE YOUR PROGRESS

Now start adding your elements to create your tag!

I used Elements:

6
13
19
35
44
46
47
75

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is Foglihten No07

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/28/14 by Christie
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.

Saturday, September 27, 2014

Rosa (K.I.T.)



Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I chose is the matching kit for Rosa by Niqui's Designs

Start by opening element 10 and placing it in the center of your canvas.
Now add element 2, resize 80% and c/p above the previous element.

Next open element 27, resize 80% and place to the left of the heart.

Now you want to add your tube.
Copy and paste your tube slightly left of the canvas.

I am using Rosa by Jose Cano. His artwork can be viewed and purchased at Cano Tubes.

PLEASE TAKE A MOMENT TO SAVE YOUR PROGRESS

Now start adding your elements to create your tag!

I used Elements:

1
12
14
25

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is Vailsnick Italic (Demo)

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/27/14 by Christie.
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.



A Note About Beehive Studios...

Hi Everyone...

I wanted to take a moment to post regarding Beehive Studios

Recently it was revealed that Ninaste and Derzi had "created" CU elements that were a copy of Neopets, which is obviously a huge no-no.

There has been a huge outcry against these two people and it got nasty. So nasty, they have closed their doors and decided to not refund people who paid for original CU elements. I feel this is not only irresponsible, but obviously makes them both look even more guilty.

I am not here to judge, but I do thank the PSP community for making everyone aware of this issue. As someone who strives to be copyright compliant, this saddens me.

At one time I CT'd for Beehive Studios, that is why you see tutorials from them on this site.

I struggled with whether or not to remove the tutorials. In the end I decided that the tutorials will stay as I worked my butt of to create the tags and the tutorials.

You will no longer be able to purchase the tubes used to create the tags, and I am not entirely sure that the matching kits used in some of the tutorials are still available. However, I feel tutorials are not really supposed to be followed to letter and most definitely not pushing you to buy the kit/tube so it can be an exact replica. I hope you can still have fun using the tutorials.

This incident is unfortunately the dark side of the PSP world.

We rely on artists and scrapkit makers to be honest with all of us and make products that are copyright compliant. I trusted Ninaste and Derzi, just as many of you did and I am sadden that they burned many of you. I hope in the end they will do the right thing.

Thank you for reading my note and have a great day!


Crowe Halloween Collab #5 (K.I.T.)

Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I chose to use is part of Arthur Crowe's 2014 Halloween Collab by Crystal's Creations
This fantastic collab is available for $5.00. Go and grab one now!

Start by opening ee2 and placing it in the center of your canvas.
Resize 85% so it fits a little better on the canvas.
Duplicate - Flip - Mirror

Now c/p ee10 into the center of the canvas

Next c/p ee30 (no need to resize) and centralize the element

PLEASE TAKE A MOMENT TO SAVE YOUR PROGRESS

Now you want to add your tube.
I chose Beauty Pumpkin Witch by Arthur Crowe.
This beautiful tube can be purchased at Arthur Crowe's Factory

Copy and paste your tube into the center of the canvas in front of the house.

C/P ee18, resize it 45% and place it over the bottom of your tube.

Now start adding elements to create your tag.

I used elements

ee1
ee11
ee14
ee20
ee21
ee23

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is RIKY Vampdator

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/25/14 by Christie
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.


Friday, September 26, 2014

Crowe Halloween Collab #4 (K.I.T.)



This tutorial will be a little bit different from the rest of my tutorials.

I don't use templates a lot, but once in a while I find one I like.

OK. Let's get started.

First you will need to visit Dangerously Delicious Designz to grab the template I am using

The one I have chosen to use is Collab #2

Open the template and Shift+D to duplicate the template, so you don't use the original.
Close the original template.

The nice thing about templates is you can pretty much do what you like with them.

I am going to use a kit to create my tag, but you don't have to.

The kit I chose to use is part of Arthur Crowe's 2014 Halloween Collab by Niqui's Designs
This fantastic collab is available for $5.00. Go and grab one now!

With the template open start flood filling or use the papers in the kit you are using.

I used a variety of papers from the kit I chose.

They are:
Paper 1
Paper 2
Paper 3
Paper 4
Paper 7
Paper 10

To use papers, Go to Selections - Select All - Float - Defloat
Choose a paper and paste as a new layer. Invert and hit delete on your keyboard. Select None.

Do this with each element on the template, until you are happy with the result.

If you choose to flood fill the different elements, you would repeat the steps above,
but add a new layer before flood filling, then select none.

To save on size, delete the original layer you replaced with the paper or flood filled layer.

PLEASE TAKE A MOMENT TO SAVE YOUR PROGRESS

Now add a tube of your choice.

I chose Colorful Halloween by Arthur Crowe. I purchased this tube from PTE which is no longer open.
Arthur has a wonderful website offering even more of his artwork. Visit his site at Arthur Crowe's Factory

Place your tube choice where you would like. I placed mine close to the center.

I added color to the words with Eyecandy 4000 Gradient Glow. I used #d63795 for the color.

Now start adding your elements to create your tag!

I used Elements:

14
18
24
26
27

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is Fiddums Family

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/27/14 by Christie.
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.

BUY NOW!
Thursday, September 25, 2014

Any Way The Wind Blows (Honored Scraps)



Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I chose is IB-AnnaMarine-32-3 by Honored Scraps
This beautiful kit and more can be purchased at CDO

Start by opening frame 01 and placing it in the center of your canvas.

Using your magic wand select inside the frame and expand by 5 pixels.

Choose a paper of your choosing. I chose paper 04. 
Copy and paste paper, invert and hit delete on your keyboard. Move below frame.

Next open element 06 and c/p over the top of the frame

PLEASE TAKE A MOMENT TO SAVE YOUR PROGRESS

Now you want to ad/d your tube. 

I am using the matching tube to this IB kit by Anna Marine from CDO.

C/P your tube where you desire. I placed mine to the left above the frame.

C/P element 11 on the right side of the frame.
Open element 05, resize 25% and c/p to the top right of the frame

Next open element 04, resize 25% and c/p where you would like on the canvas.
Now rotate the butterfly by going to Image - Rotate - Free Rotate 30.00 degrees
Sharpen and duplicate. Mirror the duplicated butterfly and place it where you would like on your tag.

C/P element 14, resize 50% and move to the bottom left of the frame, above your tube.

Feel free to add other elements to your tag.
For example, I added element 15 below the frame as an added touch to mine.

In addition I added the WordArt that came with the kit.

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is Fairydust

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/25/14 by Christie
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.

Little Miss Muffet (ScrapCandy)


This should be a pretty easy tutorial to follow and not many steps.
Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I chose is Morgana by MistyLynn's Creations
You can find more of MistyLynn's Scrapkits at Scrap Candy!

First lets start by c/p paper 11 on to the canvas above the white background.
Apply WSL Mask 321, which can be found at Weescotlass Creations. Merge Group

Open element 55 and place it where you would like on your canvas. I placed mine to the right.

Next open your tube. Copy and paste your tube just to the left of your previous element or where you would like in relation to where you put your previous element.

I am using Little Miss Muffet by Joel Adams. I purchased this tube when it was available at CILM.
However, it is available for purchase at CDO

PLEASE TAKE A MOMENT TO SAVE YOUR PROGRESS

Now start adding your elements to create your tag!

I used Elements:

15
19
47
49
51
56

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is Darkwood

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/25/14 by Christie.
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.

Wednesday, September 24, 2014

Crowe Halloween Collab #3 (K.I.T.)



Open 600x250 To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I am using is part of Arthur Crowe's 2014 Halloween Collab by Hania's Design
This fantastic collab is available for $5.00. Go and grab one now!

Start by opening paper 05 and placing it on the canvas to your liking
or you can flood fill with a color of your choice.

Next open element 15 and c/p where you would like on the canvas.
Open element 24 and place in the center of the canvas. Lower the opacity to 50%

Now add element 13 and move to the left of your canvas. Duplicate and Mirror.
Lower the opacity to 50% on both sides.

Choose the close up of the tube you want to use.

I chose Colorful Halloween by Arthur Crowe. I purchased this tube from PTE which is no longer open.
Arthur has a wonderful website offering even more of his artwork. Visit his site at Arthur Crowe's Factory

PLEASE TAKE A MOMENT TO SAVE YOUR PROGRESS

Copy and paste your tube to the right of the canvas and position to your liking.
Duplicate the tube and mirror into a position of your liking.

Change the blend mode to Luminance (Legacy) and lower the opacity to 50%

For your border, add a new layer. Go to selections and choose select all.

Go to selections again, modify and contract by 5 pixels.

Invert and flood fill with the color of your choice. I used #cd338f. Select None.
Now go to Adjust - Add/Remove Noise - Add Noise

Noise 50% - Uniform Checked - Monochrome Checked

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is ZOMBIFIED

I usually save in .png but please save your final result in your chosen format.

To Animate

Go back to when you added the border and duplicate x 3

Open Layer 1 - Add Noise with the same settings as before. Hide Layer.
Open Layer 2 - Add Noise again. Hide Layer
Open Layer 3 - Add Noise and hide layer.

With the original layer open, add your name to the tag.
Edit - Copy Merged

Launch Animation Shop

Right click - Paste as new animation

Go back and hide Layer 1. Open Layer 2 - Copy Merged
Go back to AS - Right click - Paste after current frame.

Go back and hide layer 2. Open Layer 3 - Copy Merged
Go back to AS - Right click - Paste after current frame.

In animation shop choose View - Animation
Save as desired file name

In the first window, leave setting at the top. Click Customize
Change Create palette by to Optimized Median Cut. Click OK

Click Next x 2 and Finish

My Result:


This tutorial was written on 9/22/14 by Christie.
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.

Crowe Halloween Collab #2 (K.I.T.)



Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I am using is part of Arthur Crowe's 2014 Halloween Collab by Kizzed by Kelz
This fantastic collab is available for $5.00. Go and grab one now!

Start by opening element 10 and placing it in the center of your canvas.

Using your magic wand select inside the frame and expand by 5 pixels.

Choose a paper of your choosing. I chose paper 5.
Copy and paste paper, invert and hit delete on your keyboard. Move below frame.
Don't deselect.

PLEASE TAKE A MOMENT TO SAVE YOUR PROGRESS

Choose the close up of the tube you want to use.

I chose Colorful Halloween by Arthur Crowe. I purchased this tube from PTE which is no longer open.
Arthur has a wonderful website offering even more of his artwork. Visit his site at Arthur Crowe's Factory

Using a closeup of the tube of your choice, mirror and place to the left of the frame.

Invert and hit delete on your keyboard. Deselect.
You should only have the closeup of the tube in the frame.

Change the opacity to 60% and the blend mode to Luminance (Legacy)

Now add the full sized version of your tube to the right side of the frame.

Now start adding your elements to create your tag!

I used Elements:

1
14
16
32

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is Nemo Nightmares

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/22/14 by Christie.
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.

BUY NOW!

Sexy Alluring Girl (K.I.T.)



Sexy Alluring Girl


Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.


First lets start by c/p pp06 on to the canvas above the white background.
Apply FloralMask1byJenny, which can be found at Creative Misfits. Merge Group

Now open element ee15 and c/p onto your canvas.
Duplicate and flip.

Next open ee21, resize to fit the canvas. C/P where you would like.

Next open ee27, resize and c/p on to the canvas.

Now open ee1 and c/p above the flower. You may need to resize.

Please take the time to save your progress

Now you want to add your tube. 

This beautiful girl is available for just $2.00 at Ismael's site

C/P your tube where you would like above the previous element.

Finally to finish the tag, open ee9, resize and move below your tube (see my tag if needed)

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is Sunshine Poppy

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/18/14 by Christie
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.

BUY NOW!

Crowe Halloween Collab #1 (K.I.T.)


Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

This fantastic collab is available for $5.00. Go and grab one now!

First lets start by c/p paper 04 on to the canvas above the white background.
Apply Vix_Mask433, which can be found at vixpsp. Merge Group

Now open frame 01 and place it in the center of your canvas.
Resize to your liking. I chose to resize 85%

Using your magic wand select inside the frame and expand by 5 pixels.

Choose a paper of your choosing. I chose paper 07. 
Copy and paste paper, invert and hit delete on your keyboard. Move below frame.
Don't deselect.

PLEASE TAKE A MOMENT TO SAVE YOUR PROGRESS

Now choose a close up of the tube you want to use for your tag.

I chose Colorful Halloween by Arthur Crowe. I purchased this tube from PTE which is no longer open.
Arthur has a wonderful website offering even more of his artwork. Visit his site at Arthur Crowe's Factory

Duplicate the tube and hide it. 
With the original tube selected, copy and paste your tube into the center of the canvas. 
Hit delete on your keyboard and deselect.

Unhide the duplicated tube and move to the top of the frame. With your eraser, remove any excess from the bottom part of the tube. See my tag for reference if needed

Now start adding your elements to create your tag!

I used Elements:

Black Widow
Eyeball
Halloween Goth Goblet
Skull Candle
Skulls and Rose
Skull Sucker
Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is Your Bloody Choice

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/22/14 by Christie
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.


Saturday, September 20, 2014

Latex Blonde (K.I.T.)



Latex Blonde

Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I chose is Latex Blonds Kit by Dance in the Rain
You can purchase this kit for just $2.00 or with the tube for $3.00

OK.. This should be a pretty easy tutorial to follow :)

Let's start by c/p paper 14 on to the canvas above the white background.
Apply WSL Mask 321, which can be found at Weescotslass Creations. Merge Group

Next C/P element 7 and resize to your liking.
Open element 25, c/p and resize to your liking

Add element 27 and resize slightly so it sit across the top of the frame.
Add elements 6 and 10; Resize to your liking

Now add element 23, resize to your liking and move to the bottom of the frame.

Now add a tube of your choice.

I am using Latex Blonde by Roman Zaric
This beautiful bombshell can be purchased for $1.85 or with Tube Pack 100 for $5.00

Position your tube choice where you would like and SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is Akhenaton

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/20/14 by Christie
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.

Friday, September 19, 2014

Treasured Blessings (Honored Scraps)



Treasured Blessings

Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I chose is Treasured Blessings by Honored Scraps
This beautiful kit and more can be purchased at Treasured Scraps

Start by opening element 40 and placing it to the right on your canvas.
Next add element 39 slightly lower on your canvas.

Open element 15 and c/p in the center of the canvas above the previous elements

Using your magic wand select inside the frame and expand by 5 pixels.

Choose a paper of your choosing. I chose paper 10. 
Copy and paste paper, invert and hit delete on your keyboard. Move below frame and deselect.

Please take a moment to save your progress

Now you want to add your tube. 


C/P your tube where you would like to create your tag.

Now you can start adding any elements you would like.

I used:

5
7
53
Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is Anacondas

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/19/14 by Christie
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.



Skull Nurse (K.I.T.)

Skull Nurse

Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I chose is Skull Nurse by Desirena Designs
This kit can be purchased for just $2.00 or $3.50 with the tube!

Start by opening element 20 and c/p onto your canvas.

Using your magic wand select inside the frame and expand by 5 pixels.

Choose a paper of your choosing. I chose paper 9. 
Copy and paste paper, invert and hit delete on your keyboard. Move below frame.
Don't deselect.

Now you want to add your tube. 

I am using Skull Nurse by Arthur Crowe.
The tube can be purchased for $2.00 or as a part of the Magic Pack for $5.50

Duplicate the tube and hide it. 
With the original tube selected, copy and paste your tube into the center of the canvas. 
Hit delete on your keyboard and deselect.

Unhide the duplicated tube and move to the top of the frame. With your eraser, remove any excess from the bottom part of the tube. See my tag for reference if needed

Please take a moment to save your progress

Now start adding your elements to create your tag!

I used Elements:

3
10
24
25
28
29

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is a Theme for Murder

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/18/14 by Christie
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.
Monday, September 15, 2014

Rew Halloween Boo (K.I.T.)


Rew Halloween Boo

Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

The kit I am using is part of Roman Zaric's 2014 Holloween Collab by Crystal's Creations
This fantastic collab is available for $5.00. Go and grab one now!

Start by opening element ee2 and c/p onto your canvas.
Duplicate - Flip - Mirror

Now open ee10, c/p onto the canvas. Resize 85%

Using your magic wand select inside the frame and expand by 5 pixels.

Choose a paper of your choosing. I chose paper pp8
Copy and paste paper, invert and hit delete on your keyboard. Move below frame.
Don't deselect.

Choose a tube and place in the frame in the center.

The tube I chose is Rew from Roman ZaricRew is a free tube, but she must be used with a license 
and is only available with purchase of a PTU tube.

Duplicate the tube and hide it. 
With the original tube selected, copy and paste your tube into the center of the canvas. 
Hit delete on your keyboard and deselect.

Unhide the duplicated tube and move to the top of the frame. With your eraser, remove any excess from the bottom part of the tube. See my tag for reference if needed

Please take a moment to save your progress.

Now you can start adding elements to complete your tag.

I used Elements:

7
11
15
18
20
28
29

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/15/14 by Christie
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.
All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.


Freak Show (K.I.T.)

Freak Show

Open 700x700 (You can resize later) To aid in the creation of the tag, make your background white.

For the purpose of this tutorial, I will refer to the kit and tube I chose.

This fantastic collab is available for $5.00. Go and grab one now!

Start by opening frame 01 and placing it in the center of your canvas.

Using your magic wand select inside the frame and expand by 5 pixels.

Choose a paper of your choosing. I chose paper 4.
Copy and paste paper, invert and hit delete on your keyboard. Move below frame.

Choose a tube you would like to make your tag.

I am using Antoaneta by Roman Zaric, which is available for purchase at Roman's store.
Copy and paste your tube choice where you would like on the canvas. I placed mine to the right of the frame.

Please take a moment to save your progress
Now it's time to start adding elements to your tag to make it your own.
Some of the elements I used are:
Freak Show Ticket
Funny Spider
Halloween Book
Jack Skull
Lizard Potion
Monster
Pumpkin Bear
Skull Butterfly
Winged Eye

Once you are happy with the layout of your tag, SAVE!

Don't forget to add any last minute drop shadows if you wish!

Resize tag if you would like as well!

Add Copyright information, your license and your favorite font for the name!
The font I used is bu Glenda

I usually save in .png but please save your final result in your chosen format.

This tutorial was written on 9/15/14 by Christie
Any similarities to any other tutorial is purely coincidental.
All artwork and filters are copyright of the artists and filter creators.

All tutorials are created with PSP9 and are for those with a working knowledge of Paint Shop Pro.

BUY NOW!